How to replace a pool cue tip
By poolplayer
Date: Sun, Apr 13, 2003 @ 01:23:54 CDT
Topic: Maintaining your Pool Equipment


This article describes the process (in detail) of how to replace a cue tip. Here are the items that you need to accomplish this task.

Cue tip
Razor blade
Cyanoacrylic glue preferrably in a gel form ie Duro-gel, Superglue Gel, Loctite 454
60-80 grit sandpaper
Paper towel
400-600 grit sandpaper


Cue Tips


Razor Blad


Glue


60-80 grit sandpaper


Paper Towels


400-600 grit sandpaper

Procedure

  1. Remove what's left of the old tip with the razor blade.
  2. Sand top of ferrule flat with 60-80 grit sandpaper.
  3. Sand bottom of cue tip with the same sandpaper till rough.
  4. Apply a light coat of glue to both the ferrule and bottom of tip.
  5. Carefully center the top on top of the ferrule as best as you can and hold in place for about 60 seconds.
  6. With the tip down, carefully trim the excess overhang to make the tip flush with the ferrule.
  7. Gently wet the sides of the tip and burnish with the 400-600 grit sandpaper.
  8. Shape the tip to your desired radius.
  9. All set to play now.

Things to remember when replacing a cue tip

It's recommended to get a tip that's bigger than your ferrule ie a 14mm tip if you have a 13mm ferrule diameter.

To keep your tip from popping off prematurely, it is best to let the glue cure overnight before final trimming and sanding.





This article comes from Easy Pool Tutor
http://www.easypooltutor.com

The URL for this lesson is:
http://www.easypooltutor.com/article56.html

Copyright Notice: The copyright in materials on this site and in this web site as a whole is owned by Easy Pool Tutor. The copyright in some materials incorporated within this web site is owned by third parties. You may view this article using your web browser or print out a copy solely for your own personal and non-commercial use, research or study, but with the following restrictions: (i) You may not modify the copy from how it appears in this web-site, (ii) You may not remove any trademark, copyright or other notice contained in such content, (iii) You may not republish any of the site's content on any Internet, Intranet or Extranet site or incorporate the content in any database, compilation, archive or cache, (iv) You may not distribute any of the site's content to others, whether or not for payment or other consideration, and you may not modify, copy, frame, reproduce, sell, publish, transmit, display or otherwise use any portion of the content without the written consent of owner. Distributing, modifying, transmitting, reusing, re-posting any materials on this site without the owner's permission is prohibited.